Safe restart Vision Processor

From ETC Public Wiki
Jump to: navigation, search

When you having troubles to establish connection from your windows box to vision processor. Here are step by step how to debug it.

  1. Close Stage Administration and re-launch it. Hit connect. If stage administration failed to establish connection, then try step 2.
  2. Go to vision processor.(Fig. 1 and fig. 2) Find the front panel with LCD screen. (Fig. 3) Use upper arrow keypad to navigate to "Reboot" then hit "green check mark" at the center of arrow keys. If arrow keys are not responding at all, please move to step 3.
  3. If none of the previous steps worked, then please located the power button on vision processor and hold for 3 seconds till all mocap cameras red LED lights are off and vision processor complete shuts down. Wait for about 10 to 15 seconds the hit that power button once and mocap stage should be back on in about a minute or two with all camera's red LED lights back on.
"Fig.1 Large mocap room vision processor location"
"Fig.2 Small mocap room vision processor location"
"Fig.3 LCD front panel"