Horatio on Windows 8

From ETC Public Wiki
Jump to: navigation, search

1) Click on the Start Button, then Devices & Printers.

2) Click “Add a printer” button near the top-left.

3) Choose "Add a Local Printer".

4) Choose the "Create a new port" radio button, then select "Standard TCP/IP Port" from the adjacent pull-down menu. Click Next.

5) In the "Hostname or IP address" text field, enter...

horatio.etc.cmu.edu

...and click Next. Windows will attempt to detect the printer type.

6) If a window with "Additional port information required" appears, choose "Hewlett Packard JetDirect" from the pull-down menu adjacent to the Network radio button. Click Next.

7) Windows will again communicate with the printer. When it asks you for the driver, click "Have Disk".

8) Enter this as the folder inside of which to look for drivers...

\\randon.andrew.ad.cmu.edu\dfs\software\drivers\HP\LaserJet 600 m601n\Windows\64-bit

...and Click Ok.

9) In the resulting drive list, choose "HP LaserJet 600 M601 M602 M603 PCL6”. Click Next.

10) For the printer name, you can type anything, but we recommend...

Horatio (Breakroom-PTC 5418)

...and click Next.

11) On the page about Printer Sharing, be sure the radio button "Do not share this printer" is chosen. Click Next.

12) On the last page, you can choose to make this the default printer (and if so, tick the checkbox) and also choose to print a test page (recommended). Click Finish.